
EV Charger Installation in Barnt Green
Home charging for Barnt Green's larger homes, often more than one car.
Impression Electrical & Building install EV charging across Barnt Green's larger homes. We handle multiple-car households, load sharing, and charging tied into solar and battery, on a supply sized for it. Established 2019.
Barnt Green is affluent commuter country, and its larger homes often run more than one car and heavier household loads. That changes an EV install from a single charger on a spare circuit into a proper look at what the supply can carry.
It's also where charging most often joins solar, battery and other work as one considered system rather than a bolt-on.
Barnt Green is about fifteen minutes north of us, up towards the Lickey Hills.
How we plan charging for a larger home
01 — Size up the whole supply
We look at the incoming supply and everything already drawing on it, so a charger — or two — doesn't push the house past what it can carry.
02 — Design it together
Where there's solar, battery or more than one car, we design the charging, board and any array to work as one system on one supply.
03 — Install and hand over
We fit and test the charging, confirm it works with the rest of the system, and hand over the paperwork.

Charging more than one car
Two cars charging means thinking about whether the supply can do both at once, or whether the load should be shared between them. We design for how the household actually charges rather than fitting two units and hoping the supply copes.
The result is charging that works reliably, without tripping the house when everything's on.

Tied into solar and battery
On a home with solar and storage, charging the car from your own generation makes real sense. We wire the charging so it can draw from the array and battery where possible, rather than pulling everything from the grid.
As electrical, solar and EV installers, we design the whole thing as one supply — the array, the battery, the charger and the board sized to work together.
Nearby work

Solar, storage and careful cabling across a Lapworth estate
EV charging is electrical work, and it's the same care that goes into everything we do. At Lapworth we ran the DC in underground ducting across several buildings on a three-phase supply — the tidy, properly-planned cabling behind every job.
Solar and electrical work in Barnt Green
We’re electricians first, so a charger is one part of what we do. We also install solar and battery storage and handle electrical work across Barnt Green.
EV charging in Barnt Green: your questions
Can you install charging for two or more cars?
Yes. On Barnt Green's larger homes we look at whether the supply can charge more than one car at once or whether the load should be shared, and design for how the household actually charges.
Can the charger run off my solar and battery?
Yes. We wire the charging so it can draw from your array and storage where possible, so more of your own generation goes into the car rather than coming from the grid.
Will two chargers overload a larger home's supply?
Not if it's designed properly. We size the whole installation against the incoming supply and everything already on it, using load sharing where needed so nothing trips.
Can you plan charging alongside a solar or battery install?
Yes, and it's the better way to do it. We design the charger, board and any array together as one system rather than adding each separately over time.
Design EV charging for your Barnt Green home
Tell us how many cars and whether solar's involved, and we'll design the charging as one system.